10x Genomics
Chromium Single Cell Gene Expression
Cell Ranger7.1 (latest), printed on 12/25/2024
Targeted-Compare Output Files
Here we describe the files in the outs folder of a targeted-compare run, which are generated using the cellranger targeted-compare command to directly compare results from a Targeted Gene Expression dataset and its corresponding parent Whole Transcriptome Analysis (WTA) dataset.
Table of Contents
- Run summary (web_summary.html)
- Metrics summary (metrics_summary.csv)
- Barcode summary (barcode_summary.csv)
- Feature summary (feature_summary.csv)
| After June 30, 2023, new Cell Ranger releases will no longer support Targeted Gene Expression analysis. |
Run summary (web_summary.html)
The targeted-compare pipeline outputs a summary HTML called web_summary.html that contains summary metrics and comparative analysis results.
Paired summary metrics and sample information provide an overview of the parent and targeted samples. The Targeted Enrichment table is related to the Per-Gene Read Enrichment dashboard (see below).
Under the Cell-Calling Comparison dashboard, the Barcode Rank Plot on the left is the same as that in the Cell Ranger Count Run Summary for the targeted sample, with the hovertext displaying the fraction of barcodes called as cells in one or both samples. The scatterplot on the right shows the correlation of UMI counts per barcode between the two samples. Barcodes called as cells in both samples (colored in purple) should be well-correlated.
The scatterplot on the left of the Per-Gene Read Enrichment dashboard shows the read counts per targeted gene in the targeted and parent samples. Read counts per gene are rescaled so that the total number of reads is equal in both samples. All points should lie above the dashed 1-to-1 line, and the histogram of targeted gene enrichments on the right should lie well to the right of 0.
The Per-Gene Sensitivity dashboard shows the UMI counts per targeted gene in the parent and targeted samples. Genes should ideally lie on the 1-to-1 line. UMI counts are not rescaled to sequencing depth, so genes may lie slightly above or below the dashed line if there are large differences in targeted sequencing depth (Mean Targeted Reads per Cell; see below) across both samples. A histogram centered around 1 (or greater) indicates that UMIs in the parent sample were successfully recovered.
The dashboard "t-SNE Projection of Cells, Colored by Cluster" allows for comparison of single-cell clustering patterns across samples. Barcodes called as cells in either sample are used for this analysis. The t-SNE projections and clusterings are computed separately for:
- The parent sample using all genes (Parent - All Genes)
- The parent sample using targeted genes (Parent - Targeted Genes)
- The targeted sample using targeted genes (Targeted)
Barcodes are clustered using the K-Means algorithm (see Gene Expression Algorithms Overview). The selected value of k (the number of clusters) is that which yields the best Davies-Bouldin index in the "Parent - All Genes" sample, a rough measure of clustering quality. The color of the barcode represents its cluster, with barcodes that are not called as cells in that sample being colored in gray.
While the clustering patterns remain sample-specific, the t-SNE projection displayed can be chosen using the dropdown in the upper-right corner. For example, selecting the Parent - Targeted Genes option displays barcodes using t-SNE projection 2 in all three plots. Lastly the Per Sample selection shows the three individual t-SNEs and clustering patterns side-by-side. Clusters with a high fraction of overlapping barcodes across samples use the same color across samples. For example, in the image above, the orange cluster is largely composed of the same barcodes in all three samples, while the yellow cluster in the bottom right of the Targeted plot contains barcodes corresponding to a variety of clusters and therefore remains unmatched in the other two plots.
Metrics summary (metrics_summary.csv)
The list of metrics displayed in the above Summary HTML file are also provided in CSV format. Below are the definitions of the reported metrics.
| Metric | Description |
|---|---|
Total Reads Pairs in Targeted Sample | Total number of read pairs in the targeted sample that were assigned to gene expression libraries in demultiplexing. |
Total Reads Pairs in Parent Sample | Total number of read pairs in the parent sample that were assigned to gene expression libraries in demultiplexing. |
Fraction of Reads Confidently Mapped to the | Fraction of reads that mapped to a unique and targeted gene in the transcriptome in the targeted sample. The read must be consistent with annotated splice junctions. These reads are considered for UMI counting. This metric differs slightly from the similarly-named metrics in the Targeted Gene Expression Run Summary, due to the filtering of reads with invalid barcodes or UMIs with low read support. |
Fraction of Reads Confidently Mapped to the | Fraction of reads that mapped to a unique and targeted gene in the transcriptome in the parent sample. The read must be consistent with annotated splice junctions. These reads are considered for UMI counting. |
Number of cells called in Targeted Sample | Number of barcodes called as cells in the Targeted Sample. |
Number of cells called in Parent Sample | Number of barcodes called as cells in the Parent Sample. |
Number of cells called in Parent and Targeted | Number of barcodes called as cells in both the parent and targeted samples. |
Number of cells called only in Targeted Sample | Number of barcodes called as cells in the Targeted Sample and not the Parent Sample. |
Number of cells called only in Parent Sample | Number of barcodes called as cells in the Parent Sample and not the Targeted Sample. |
Mean Reads per Cell in Targeted Sample | The total number of reads divided by the number of barcodes associated with cell-containing partitions in the targeted sample. |
Mean Reads per Cell in Parent Sample | The total number of reads divided by the number of barcodes associated with cell-containing partitions in the parent sample. |
Mean Targeted Reads per Cell in Targeted Sample | The total number of targeted reads divided by the number of barcodes associated with cell-containing partitions in the targeted sample. |
Mean Targeted Reads per Cell in Parent Sample | The total number of targeted reads divided by the number of barcodes associated with cell-containing partitions in the parent sample. |
Median Targeted Genes per Cell in Targeted Sample | The median number of targeted genes detected per cell-associated barcode in the targeted sample. |
Median Targeted Genes per Cell in Parent Sample | The median number of targeted genes detected per cell-associated barcode in the parent sample. |
Number of Targeted Genes Detected in Targeted Sample | Number of Targeted Genes Detected in Targeted Sample. A gene is considered detected if it has at least 1 cell-associated UMI. |
Number of Targeted Genes Detected in Parent Sample | Number of Targeted Genes Detected in Parent Sample. A gene is considered detected if it has at least 1 cell-associated UMI. |
Number of Targeted Genes Detected Exclusively | Number of Targeted Genes Detected Exclusively in Targeted Sample. A gene is considered detected if it has at least 1 UMI count in cell-associated barcode. |
Number of Targeted Genes Detected Exclusively | Number of Targeted Genes Detected Exclusively in Parent Sample. A gene is considered detected if it has at least 1 UMI count in cell-associated barcode. |
Median Targeted UMIs per Cell in Targeted Sample | The median number of UMI counts in targeted genes per cell-associated barcode in the targeted sample. |
Median Targeted UMIs per Cell in Parent Sample | The median number of UMI counts in targeted genes per cell-associated barcode in the parent sample. |
Number of Targeted Genes Enriched Relative to Parent | Number of targeted genes classified as enriched. Only genes that have at least 1 cell-associated UMI in the parent sample are considered. Genes are classified as enriched or non-enriched based on their read enrichment (see Targeted Gene Expression Algorithms). |
Mean Targeted Reads per Cell Relative to Parent | Mean ratio of targeted reads per cell in the targeted sample relative to parent sample for all barcodes called as cells in both samples. |
Mean Read Enrichment across Targeted Genes | Mean Read Enrichment across Targeted Genes. Enrichments are only computed for genes with at least 1 cell-associated UMI in both the targeted and parent samples. Mean is the geometric mean of the enrichments. Samples are rescaled to the total number of reads in order to account for differences in sequencing depth. |
Per-gene read counts R-squared | Pearson correlation coefficient (squared) of the number of reads confidently mapped to targeted genes (log10) in the targeted vs parent experiments. |
Mean Ratio of Targeted UMI Counts in Targeted | Mean per-gene ratio of UMIs observed in targeted sample relative to the parent sample. |
Per-gene UMI counts R-squared | Pearson correlation coefficient (squared) of the number of UMIs confidently mapped to targeted genes (log10) in the targeted vs parent experiments. |
Barcode summary (barcode_summary.csv)
A CSV file containing data per barcode in the targeted and parent samples. Each row corresponds to a barcode.
$ head -5 barcode_summary.csv Number of Reads in Targeted Sample in Targeted Genes,Number of Umis in Targeted Sample in Targeted Genes,Barcode,Is Cell in Targeted Sample,Number of Reads in Parent Sample in Targeted Genes,Number of Umis in Parent Sample in Targeted Genes,Is Cell in Parent Sample,Number of Reads in Targeted Sample in All Genes,Number of Umis in Targeted Sample in All Genes,Number of Reads in Parent Sample in All Genes,Number of Umis in Parent Sample in All Genes,Cell Call Category,Cluster in Targeted Sample,Cluster in Parent Sample Subset to Targeted Genes,Cluster in Parent Sample 49100,4746,CATATTCGTACCATCA-1,True,19866,4566,True,55048,6081,211045,46787,both,3,3,1 54912,4839,GCAGCCATCACATAGC-1,True,17716,4220,True,55884,5245,199889,45704,both,7,7,4 51920,4408,ACGATACTCTGAGTGT-1,True,12354,3179,True,53137,5057,140148,34364,both,3,3,3 38994,4321,AGATTGCCAAACCTAC-1,True,18670,4239,True,39411,4445,89865,20624,both,2,2,2
Column descriptions:
| Column Name | Description |
|---|---|
Barcode | Barcode sequence being considered. |
Number of Reads in Targeted Sample in Targeted Genes | Number of reads with this barcode that mapped to a unique, targeted gene in the targeted sample. The read must be consistent with annotated splice junctions and is considered for UMI counting. |
Number of Umis in Targeted Sample in Targeted Genes | Number of UMIs with this barcode that mapped to a unique, targeted gene in the targeted sample. |
Is Cell in Targeted Sample | True or False, whether this barcode was called as a cell in the targeted sample. |
Number of Reads in Parent Sample in Targeted Genes | Number of reads with this barcode that mapped to a unique, targeted gene in the parent sample. The read must be consistent with annotated splice junctions and is considered for UMI counting. |
Number of Umis in Parent Sample in Targeted Genes | Number of UMIs with this barcode that mapped to a unique, targeted gene in the parent sample. |
Is Cell in Parent Sample | True or False, whether this barcode was called as a cell in the parent sample. |
Number of Reads in Parent Sample in All Genes | Number of reads with this barcode that mapped to a unique gene in the parent sample. The read must be consistent with annotated splice junctions and is considered for UMI counting. |
Number of Umis in Parent Sample in All Genes | Number of UMIs with this barcode that mapped to a unique gene in the parent sample. |
Number of Reads in Parent Sample in All Genes | Number of reads with this barcode that mapped to a unique gene in the parent sample. The read must be consistent with annotated splice junctions and is considered for UMI counting. |
Number of Umis in Parent Sample in All Genes | Number of UMIs with this barcode that mapped to a unique gene in the parent sample. |
Cell Call Category | Classifies barcodes based on whether they are called as cells in these samples. Must be one of 1) both, 2) targeted-only, 3) parent-only, or 4) neither. |
Cluster in Targeted Sample | Cluster this barcode belongs to. Will be -1 if the barcode is not a cell in this sample. |
Feature summary (feature_summary.csv)
A CSV file containing data per feature in the targeted and parent samples. Each row corresponds to a feature.
$ head -5 feature_summary.csv Feature Id,Feature Name,Is Targeted,Read Enrichment,Is Enriched,Number of Reads in Targeted Sample,Number of Umis in Targeted Sample,Number of Reads Cells in Targeted Sample,Number of Umis Cells in Targeted Sample,Number of Reads in Parent Sample,Number of Umis in Parent Sample,Number of Reads Cells in Parent Sample,Number of Umis Cells in Parent Sample,Umi Recovery ENSG00000116691,MIIP,False,-9.696865148549238,False,3,3,3,3,11340,2532,10897,2420,0.0012396694214876036 ENSG00000120949,TNFRSF8,True,4.55480906020458,True,5943,329,5671,311,1115,271,1056,257,1.2101167315175096 ENSG00000285604,AL357835.1,False,,False,0,0,0,0,0,0,0,0, ENSG00000028137,TNFRSF1B,True,4.258973216469358,True,170378,11129,160881,10385,38995,9377,36776,8835,1.1754385964912282 ENSG00000048707,VPS13D,False,-10.307936333724916,False,1,1,1,1,6169,1887,5548,1686,0.0005931198102016608
Column descriptions:
| Column Name | Description |
|---|---|
Feature Id | Unique ID for the gene, as specified via the ID field in the reference transcriptome GTF. |
Feature Name | Common gene name, as specified via the name field in the reference transcriptome GTF. |
Is Targeted | True or False, whether this gene is included in the target panel. |
Number of Reads in Targeted Sample | Number of reads aligned uniquely to this gene in the targeted sample. The read must be consistent with annotated splice junctions for this gene and is considered for UMI counting. |
Number of Umis in Targeted Sample | Number of UMIs aligned uniquely to this gene in the targeted sample. |
Number of Reads Cells in Targeted Sample | Number of cell-associated reads aligned uniquely to this gene in the targeted sample. The read must be consistent with annotated splice junctions for this gene and is considered for UMI counting. |
Number of Umis Cells in Targeted Sample | Number of cell-associated UMIs aligned uniquely to this gene in the targeted sample. |
Number of Reads in Parent Sample | Number of reads aligned uniquely to this gene in the parent sample. The read must be consistent with annotated splice junctions for this gene and is considered for UMI counting. |
Number of Umis in Parent Sample | Number of UMIs aligned uniquely to this gene in the parent sample. |
Number of Reads Cells in Parent Sample | Number of cell-associated reads aligned uniquely to this gene in the parent sample. The read must be consistent with annotated splice junctions for this gene and is considered for UMI counting. |
Number of Umis Cells in Parent Sample | Number of cell-associated UMIs aligned uniquely to this gene in the parent sample. |
Read Enrichment | Defined as Number of reads in Targeted Sample divided by Number of reads in Parent Sample, after rescaling read counts in each sample to the same number of read pairs from Gene Expression libraries |
Is Enriched | True or False, whether or not the gene is enriched in the Targeted Sample relative to the Parent sample. See Targeted Gene Expression Algorithms for more information on how this is determined. |
Umi Recovery | Defined as Number of UMIs in Targeted Sample divided by Number of UMIs in Parent Sample. This ratio uses the raw UMI counts in both experiments and is not adjusted for sequencing depth. |