HOME  ›   pipelines
If your question is not answered here, please email us at:  ${email.software}

Cell Ranger


Loupe

10x Genomics
Chromium Single Cell Gene Expression

Cell Ranger7.1 (latest), printed on 12/18/2024

Cluster Mode

Cluster mode is one of four primary ways of running Cell Ranger. To learn about the other approaches, go to the computing options page.

Table of Contents

Cell Ranger can be run in cluster mode, using SGE or LSF to run the stages on multiple nodes via batch scheduling. This allows highly parallelizable stages to use hundreds or thousands of cores concurrently, dramatically reducing time to solution.

Cluster Mode

Running pipelines in cluster mode requires the following:

  1. Cell Ranger is installed in the same location on all nodes of the cluster. For example, /opt/cellranger-7.1.0 or /net/apps/cellranger-7.1.0
  2. Cell Ranger pipelines are run on a shared file system accessible to all nodes of the cluster. NFS-mounted directories are the most common solution for this requirement.
  3. The cluster accepts both single-core and multithreaded (shared-memory) jobs.

Configuring cluster template

Installing the Cell Ranger software on a cluster is identical to installation on a local server. After confirming that the cellranger commands can run in single server mode, configure the job submission template that Cell Ranger uses to submit jobs to the cluster. Assuming Cell Ranger is installed to /opt/cellranger-7.1.0, the process is as follows.

Step 1. Navigate to the Martian runtime's jobmanagers/ directory that contains example jobmanager templates.

# command to change directory
cd /opt/cellranger-7.1.0/external/martian/jobmanagers

# command to list files
tree -L 2
.
├── config.json
├── hydra.template
├── lsf.template.example
├── pbspro.template.example
├── retry.json
├── sge_queue.py
├── sge.template.example
├── slurm.template.example
└── torque.template.example

Step 2. Make a copy of the cluster's example template (SGE or LSF) to either sge.template or lsf.template in the jobmanagers/ directory.

# command to copy file
cp -v sge.template.example sge.template

`sge.template.example' -> `sge.template'

# command to list files
tree -L 2
.
├── config.json
├── hydra.template
├── lsf.template.example
├── pbspro.template.example
├── retry.json
├── sge_queue.py
├── sge.template.example
├── sge.template
├── slurm.template.example
└── torque.template.example

The job submission templates contain several special variables that are substituted by the Martian runtime when each stage is submitted. Specifically, the following variables are expanded when a pipeline is submitting jobs to the cluster:

Variable Must be present? Description
__MRO_JOB_NAME__ Yes Job name composed of the sample ID and stage being executed
__MRO_THREADS__ No Number of threads required by the stage
__MRO_MEM_GB__
__MRO_MEM_MB__		 No Amount of memory (in GB or MB) required by the stage
__MRO_MEM_GB_PER_THREAD__
__MRO_MEM_MB_PER_THREAD__		 No Amount of memory (in GB or MB) required per thread in multithreaded stages.
__MRO_STDOUT__
__MRO_STDERR__		 Yes Paths to the _stdout and _stderr metadata files for the stage
__MRO_CMD__ Yes Bourne shell command to run the stage code

It is critical that the special variables listed as required are present in the final template you create. For more information on how the template should appear for a cluster, consult your cluster administrator or help desk.

Additional template considerations

Depending on which job scheduler you have, select a tab below.

For SGE cluster, you MUST replace <pe_name> within the example template to reflect the name of the cluster's multithreaded parallel environment. To view a list of the cluster's parallel environments, use the qconf -spl command.

The most common modifications to the job submission template include adding additional lines to specify:

  1. The research group's queue. For example, #$ -q smith.q
  2. The account to which jobs will charge. For example, #$ -A smith_lab
The most common modifications to the job submission template include adding additional lines to specify:
  1. Your research group's queue. For example, #BSUB -q smith_queue
  2. The account to which your jobs will charge. For example, #BSUB -P smith_lab

Validating template configuration

To run a Cell Ranger pipeline in cluster mode, add the --jobmode=sge or --jobmode=lsf command-line option when using the cellranger commands. It is also possible to use --jobmode=<PATH>, where <PATH> is the full path to the cluster template file.

To validate that cluster mode is properly configured, follow the same validation instructions given for cellranger in the Installation page, but add --jobmode=sge or --jobmode=lsf.

cellranger mkfastq --run=./tiny-bcl --samplesheet=./tiny-sheet.csv --jobmode=sge
 
Martian Runtime - 7.1.0
 
Running preflight checks (please wait)...
2016-09-13 12:00:00 [runtime] (ready)           ID.HAWT7ADXX.MAKE_FASTQS_CS.MAKE_FASTQS.PREPARE_SAMPLESHEET
2016-09-13 12:00:00 [runtime] (split_complete)  ID.HAWT7ADXX.MAKE_FASTQS_CS.MAKE_FASTQS.PREPARE_SAMPLESHEET
...

Once the preflight checks are finished, check the job queue to see stages queuing up:

qstat
job-ID  prior   name       user         state submit/start at     queue                          slots ja-task-ID
-----------------------------------------------------------------------------------------------------------------
8675309 0.56000 ID.HAWT7AD jdoe         qw    09/13/2016 12:00:00 all.q@cluster.university.edu       1
8675310 0.55500 ID.HAWT7AD jdoe         qw    09/13/2016 12:00:00 all.q@cluster.university.edu       1

In the event of a pipeline failure, an error message is displayed.

[error] Pipestance failed. Please see the log at:
HAWT7ADXX/MAKE_FASTQS_CS/MAKE_FASTQS/MAKE_FASTQS_PREFLIGHT/fork0/chnk0/_errors
 
Saving diagnostics to HAWT7ADXX/HAWT7ADXX.debug.tgz
For assistance, upload this file to 10x by running:
 
uploadto10x <your_email> HAWT7ADXX/HAWT7ADXX.debug.tgz

The _errors file contains a jobcmd error:

cat HAWT7ADXX/MAKE_FASTQS_CS/MAKE_FASTQS/MAKE_FASTQS_PREFLIGHT/fork0/chnk0/_errors
 
jobcmd error:
exit status 1

The most likely reason for this failure is an invalid job submission template. This occurs when the job submission via qsub or bsub commands failed.

The "tiny" dataset doesn't stress the cluster, so it is worthwhile to follow up with a more realistic test using one of our sample datasets.

Cluster Mode mechanics

There are two subtle variants of running cellranger pipelines in cluster mode, each with its pitfalls. Check with your cluster administrator to see which approach is compatible with your institution's setup.

  1. Run cellranger with --jobmode=sge on the head node. Cluster mode was originally designed for this use case. However, this approach leaves mrp and mrjob running on the head node for the duration of the pipeline, and some clusters impose time limits to prevent long-running processes.
  2. Use a job script to submit a cellranger command with --jobmode=sge: With this approach, mrp and mrjob run on a cluster mode. However, the cluster must allow jobs to be submitted from a compute node to make this viable.

When cellranger is run in cluster mode, a single library analysis is partitioned into hundreds and potentially thousands of smaller jobs. The underlying Martian pipeline framework launches each stage job using the qsub or bsub commands when running on SGE or LSF cluster, respectively. As stage jobs are queued, launched, and completed, the pipeline framework tracks their status using the metadata files that each stage maintains in the pipeline output directory.

Like single server pipelines, cluster-mode pipelines can be restarted after a failure. They maintain the same order of execution for dependent stages of the pipeline. All executed stage code is identical to single server mode, and the quantitative results are identical to the limit of each stage's reproducibility.

In addition, the Cell Ranger UI can still be used with cluster mode. Because the Martian pipeline framework runs on the node from which the command was issued, the UI will also run from that node.

Memory requests and consumption

Stages in the Cell Ranger pipelines each request a specific number of cores and memory to aid with resource management. These values are used to prevent oversubscription of the computing system when running pipelines in single server mode. The way CPU and memory requests are handled in cluster mode is defined by the following:

Depending on which job scheduler you have, select a tab below.

SGE supports requesting memory via the mem_free resource natively, although your cluster may have another mechanism for requesting memory. To pass each stage's memory request through to SGE, add line to your sge.template that requests mem_free, h_vmem, h_rss, or the custom memory resource defined by your cluster: 
cat sge.template
#$ -N __MRO_JOB_NAME__
#$ -V
#$ -pe threads __MRO_THREADS__
#$ -l mem_free=__MRO_MEM_GB__G
#$ -cwd
#$ -o __MRO_STDOUT__
#$ -e __MRO_STDERR__
 
__MRO_CMD__

The h_vmem (virtual memory) and mem_free/h_rss (physical memory) represent two different quantities and that Cell Ranger stages' __MRO_MEM_GB__ requests are expressed as physical memory. Using h_vmem in your job template may cause certain stages to be unduly killed if their virtual memory consumption is substantially larger than their physical memory consumption. It follows that we do not recommend using h_vmem.

LSF supports job memory requests through the -M and -R [mem=...] options, but these requests generally must be expressed in MB, not GB. As such, your LSF job template should use the __MRO_MEM_MB__ variable rather than __MRO_MEM_GB__. For example, 
cat bsub.template
#BSUB -J __MRO_JOB_NAME__
#BSUB -n __MRO_THREADS__
#BSUB -o __MRO_STDOUT__
#BSUB -e __MRO_STDERR__
#BSUB -R "rusage[mem=__MRO_MEM_MB__]"
#BSUB -R span[hosts=1]
 
__MRO_CMD__

For clusters whose job managers do not support memory requests, it is possible to request memory in the form of cores via the --mempercore command-line option. This option scales up the number of threads requested via the __MRO_THREADS__ variable according to how much memory a stage requires.

For example, given a cluster with nodes that have 16 cores and 128 GB of memory (8 GB per core), the following pipeline invocation command

cellranger mkfastq --run=./tiny-bcl --samplesheet=./tiny-sheet.csv --jobmode=sge --mempercore=8

will issue the following resource requests:

As the final bullet point illustrates, this mode can result in wasted CPU cycles and is only provided for clusters that cannot allocate memory as an independent resource.

Every cluster configuration is different. If you are unsure of how your cluster resource management is configured, contact your cluster administrator or help desk.

Overriding default stage memory and thread requests

Each stage requests several threads and maximum free memory. These values are hardcoded into each stage and determined empirically by looking at in-house data runs, as well as reports from our customers. You may find that on your data, certain stages do not require as much memory as requested, or may require more memory than our defaults. The latter is more serious, as clusters may impose strict memory limits, and kill a job if those limits are exceeded.

You can override the defaults of a stage by supplying an override.json file, and specifying this file as the --override argument to your pipeline. Here is an example of an override JSON file to Cell Ranger, which overrides the memory requests of the count pipelines:

{
 "SC_RNA_COUNTER_CS.SC_MULTI_CORE.MULTI_GEM_WELL_PROCESSOR.COUNT_GEM_WELL_PROCESSOR._BASIC_SC_RNA_COUNTER._MATRIX_COMPUTER.MAKE_SHARD": {
    "chunk.mem_gb": 16,
    "chunk.threads": 2
  }
}

This configuration will increase the memory and threads requested (originally 6GB and 1 thread).

To run a pipeline with the above configuration, supply the JSON file as the --override parameter:

cellranger count --id=sample ... --override=./override.json

Overrides apply to pipelines executed both on the cluster and in local mode, but are likely most applicable to cluster mode users.

Controlling rate of job submissions

Some Cell Ranger pipeline stages are divided into hundreds of jobs. By default, the rate at which these jobs are submitted to the cluster is throttled to at most 64 at a time and at least 100 ms between each submission to avoid running into limits on clusters that impose quotas on the total number of pending jobs a user can submit.

If your cluster does not have these limits or is not shared with other users, you can control how the Martian pipeline runner sends job submissions to the cluster by using the --maxjobs and --jobinterval parameters.

To increase the cap on the number of concurrent jobs to 200, use the --maxjobs parameter:

cellranger count --id=sample ... --jobmode=sge --maxjobs=200

You can also change the rate limit on how often the Martian pipeline runner sends submissions to the cluster. To add a five-second pause between job submissions, use the --jobinterval parameter:

cellranger count --id=sample ... --jobmode=sge --jobinterval=5000

The job interval parameter is in milliseconds. The minimum allowable value is 1.