Cell Ranger ATAC2.0, printed on 12/22/2024
Cell Ranger ATAC provides pre-built human (GRCh38) and mouse (mm10) reference packages for use with cellranger-atac count. To create and use a custom reference package, Cell Ranger ATAC requires a reference genome sequence (FASTA file) and gene annotations (GTF file). Optionally transcription factor motifs can be specified in JASPAR format.
| Cell Ranger ATAC 2.0 pipelines can only be run on references that are constructed using cellranger-atac mkref version 2.0 or using cellranger-arc mkref version 1.0 or 2.0. |
Cell Ranger ATAC supports the use of customer-generated references under the following conditions:
| Note that reference packages generated using cellranger-arc mkref are compatible with Cell Ranger ATAC pipelines. |
We outline the steps to create a reference package starting from a reference genome and a set of gene annotations.
FASTA and GTF files can be downloaded from sites like ENSEMBL and UCSC. The downloaded files are typically compressed. They must be uncompressed in order to process them in subsequent steps. The most comprehensive genome sequence and annotations are recommended:
This step is optional. Any gene that is contained in the GTF file will end up in the final count matrix and analysis. When several low confidence gene annotations are present the peaks are less interpretable. For example, if a GTF contains a low-confidence gene annotation that overlaps with a high-confidence protein coding gene then a nearby peak cannot automatically be interpreted as a promoter. GTF files downloaded from sites like ENSEMBL and UCSC often contain transcripts and genes which need to be filtered from your final annotation. Some examples of filters may include
restricting to one or more classes of genes: GTF files often contain a field
like gene_biotype or gene_type labelling a gene class as protein-coding
or lincRNA etc.
removing genes from the Pseudo-Autosomal Region
removing low-confidence transcripts
See the filters used for the pre-built GRCh38 and mm10 references.
This step is optional. When a motifs file in JASPAR format is supplied the pipeline generates additional transcription factor analyses as described here. If these analyses are of interest to you you can download transcription factor motif position-weight matrices in JASPAR format, for example, from JASPAR 2018. The JASPAR format specifies a motif name using a FASTA-style header line followed by the position-weight matrix. Here is an example:
>Arnt_MA0004.1 A [ 4 19 0 0 0 0 ] C [ 16 0 20 0 0 0 ] G [ 0 1 0 20 0 20 ] T [ 0 0 0 0 20 0 ]
The pre-built GRCh38 and
mm10 references utilize JASPAR
vertebrate, non-redundant motifs that can be downloaded from JASPAR
2018.
Note: the motif headers are modified such that >MOTIF_ID\tMOTIF_NAME is turned
into >MOTIF_NAME_MOTIF_ID. This modification allows for better readability of
the motif analysis results.
cellranger-atac mkref takes as input a configuration file that bundles various inputs to the tool. We explain how to construct a configuration file using the example of GRCh38:
{
organism: "human"
genome: ["GRCh38"]
input_fasta: ["/path/to/GRCh38/assembly.fa"]
input_gtf: ["/path/to/gencode/annotation.gtf"]
non_nuclear_contigs: ["chrM"]
input_motifs: "/path/to/jaspar/motifs.pfm"
}
Each line consists of a key: value and note that some fields are plain strings enclosed by double quotes "", other fields are filesystem paths that are also enclosed by double quotes "", and finally some parameters are lists of strings/paths enclosed by square brackets []. The individual parameter fields are described below:
| Parameter | Function |
|---|---|
| organism | (Optional; string) Name of the organism. This is displayed in the web summary but is otherwise not used in the analysis. |
| genome | (Required; list of strings) name(s) of the genome(s) that comprise the organism. Note: Cell Ranger ATAC only supports single-species references so this list should be of length 1. The reference package is constructed in the current working directory where the directory name is the name of the genome. In the example above the reference package would be constructed in $(pwd)/GRCh38. |
| input_fasta | (Required; list of paths) path(s) to the assembly fasta file(s) for each genome in uncompressed FASTA format. Note: Cell Ranger ATAC only supports single-species references so this list should be of length 1. |
| input_gtf | (Required; list of paths) path(s) to the gene annotation GTF file(s) for each genome in GTF format. Note: Cell Ranger ATAC only supports single-species references so this list should be of length 1. |
| non_nuclear_contigs | (Optional; list of strings) name(s) of contig(s) that do not have any chromatin structure, for example, mitochondria or plastids. For the GRCh38 assembly this would be ["chrM"]. These contigs are excluded from peak calling since the entire contig will be "open" due to a lack of chromatin structure. |
| input_motifs | (Optional; path) path to file containing transcription factor motifs in JASPAR format (see above). Note: the any spaces in the header name are converted to a single underscore. For ease of use in Loupe we recommend using a header that begins with a human-readable name rather than a motif identifier. |
To create the reference package, use the cellranger-atac mkref command, passing it one or more matching sets of FASTA and GTF files. This utility copies your FASTA and GTF, indexes these in several formats, and outputs a folder with the name you pass to --genome.
| Argument | Description |
|---|---|
| --config | (Required; path) Path to configuration file containing additional information about the reference. See above for more details. |
| --ref-version | (Optional; string) Reference version string to include with reference. |
To build a reference, run mkref as illustrated below:
$ cellranger-atac mkref --config=/home/jdoe/10x_references/GRCh38.config >>> Creating reference for GRCh38 <<< Creating new reference folder at /home/jdoe/10x_references/GRCh38 ...done Writing genome FASTA file into reference folder... ...done Indexing genome FASTA file... ...done Writing genes GTF file into reference folder... ...done Writing genome metadata JSON file into reference folder... Computing hash of genome FASTA file... ...done Computing hash of genes GTF file... ...done ...done Generating bwa index (may take over an hour for a 3Gb genome)... [bwa_index] Pack FASTA... 0.13 sec [bwa_index] Construct BWT for the packed sequence... [bwa_index] 4.05 seconds elapse. [bwa_index] Update BWT... 0.06 sec [bwa_index] Pack forward-only FASTA... 0.09 sec [bwa_index] Construct SA from BWT and Occ... 1.80 sec [main] Version: 0.7.17-r1188 [main] CMD: bwa index /home/jdoe/10x_references/GRCh38/fasta/genome.fa [main] Real time: 6.206 sec; CPU: 6.137 sec done Writing TSS and transcripts bed file... ...done Writing genome metadata JSON file into reference folder... Computing hash of genome FASTA file... ...done Computing hash of genes GTF file... ...done ...done \>>> Reference successfully created at GRCh38 <<<
The created reference package will contain the following files:
GRCh38 ├── fasta │ ├── genome.fa │ ├── genome.fa.amb │ ├── genome.fa.ann │ ├── genome.fa.bwt │ ├── genome.fa.fai │ ├── genome.fa.pac │ └── genome.fa.sa ├── genes │ └── genes.gtf.gz ├── reference.json ├── regions ├── motifs.pfm # present if motifs file was supplied ├── transcripts.bed └── tss.bed
Indexing a typical human 3Gb FASTA file often takes up to 8 core hours and requires 32 GB of memory.
The only difference between a reference constructed using cellranger-atac mkref and cellranger-arc mkref is that Cell Ranger ARC references contain a genome index for the splice-aware STAR aligner, which is used to compute alignments of gene expression reads. An ARC reference can be used with Cell Ranger ATAC. But the reverse is not true, i.e., an ATAC reference cannot be used with Cell Ranger ARC.
Provided that you follow the format described above, it is fairly simple to add
custom gene definitions to an existing reference package constructed using
cellranger-atac mkref. If we assume that the reference
package is located in REF_DIR, the FASTA sequence records are stored in
REF_DIR/fasta/genome.fa and the gene annotations are compressed and stored in
REF_DIR/genes/genes.gtf.gz. First, create a new FASTA reference file by adding
any additional contigs for the new genes to REF_DIR/fasta/genome.fa if needed.
Next create a new GTF file by uncompressing REF_DIR/genes/genes.gtf.gz and
then appending records for each new gene. Note that the new genes must have GTF
features of type 'exon' for each exon and 'transcript' for each transcript.
The GTF file format is essentially a list of records, one per line, each comprising nine tab-delimited non-empty fields.
| Column | Name | Description |
|---|---|---|
| 1 | Chromosome | Must refer to a chromosome/contig in the genome fasta. |
| 2 | Source | Unused. |
| 3 | Feature | cellranger-atac count requires the presence of an 'exon' row for each exon and a 'transcript' row for each transcript. |
| 4 | Start | Start position on the reference (1-based inclusive). |
| 5 | End | End position on the reference (1-based inclusive). |
| 6 | Score | Unused. |
| 7 | Strand | Strandedness of this feature on the reference: + or -. |
| 8 | Frame | Unused. |
| 9 | Attributes | A semicolon-delimited list of key-value pairs of the form key "value". The attribute keys transcript_id, gene_name and gene_id are required. |
After adding the necessary records to your FASTA file and the additional lines to your GTF file, run cellranger-atac mkref as described above.